|
|
Travelling Crab
Mikulec, Roman ; Řezníček, Milan (referee) ; Malášek, Jiří (advisor)
This work deals with the calculation and suggestion of the main parts of the travelling crab for lifting capacity of 45 000 kg. It consists primarily of determining the ropes, pulleys and cable drum and assigning of appropriate engine, brakes, gearbox and clutch. The work also contains strength calculation and suggested dimensions of main parts of sheave block, like the pin hook block, crossbeam, hook nut and rope pulleys, which are delivered with drawing documentation along with drawing of sheave block and piece list.
|
|
|
Grab Dredger
Kubánek, Jan ; Smutek, Josef (referee) ; Škopán, Miroslav (advisor)
When soluting the contruction of a grab dredger we will deal with suitable solution with reference to its using and capacity, possibilites of its setting in low temperatures and incidental aplication of the exchangeable abrasion - resistant mouldings. There will be made a calculation of forces taking effect on a grab dredger and a check calculation of the chosen structural parts.
|
|
|
Stroke mechanism of crane trolley
Julínek, Petr ; Kašpárek, Jaroslav (referee) ; Pokorný, Přemysl (advisor)
This bachelor´s thesis deals with proposal basic parameters of stroke mechanism of crane trolley for the weights 16 000 kg. At work is proposed to rope mean, rope drum dimensions, dimensions of pulleys, motor, gearbox, bearing deposit. Individual chapters provide justification for choice of devices.
|
|
|
Differential tackle
Poliak, Daniel ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This bachelor thesis deals with the design and strength calculation of the differential hoist. The chain block is self-locking with a load capacity of 400 kg and a lifting height of 4750 mm. The design is projected with safety consideration to the flexibility limit state. The project also includes computational report and drawing documentation.
|
|
| |
|
|
Stroke mechanism of crane trolley
Galas, Radovan ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
Bachelor's thesis deals with design of stroke mechanism of crane trolley loads for the weights which do not exceed 5 000 kg. This thesis divided into written and practical sections. Written part deals with the calculation of the principal dimensions of lifting and stress control of cable reel. In this work there are also given reasons for choosing certain key parts of the lifting mechanism, such as: electric motor, gearbox, etc. Prior to the calculations in each chapter there is usually located a short introduction of the topic. The practical part contains a drawing of the complete lifting mechanism, cable reel assembly and two production drawings.
|
|
|
Tackles
Stanec, Stanislav ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
The first part of the bachelor‘s thesis contains background research of constructions and the basic calculations of the tackles. In the second part there is worked out a design and calculation the tackle of Archimedes on the basis of the suitably chosen parameters. Drawing documentation is attached to this thesis.
|
|
|
Stroke mechanism of crane trolley
Julínek, Petr ; Kašpárek, Jaroslav (referee) ; Škopán, Miroslav (advisor)
This bachelor´s thesis deals with proposal basic parameters of stroke mechanism of crane trolley for the weights 16 000 kg. At work is proposed to rope mean, rope drum dimensions, dimensions of pulleys, motor, gearbox, bearing deposit. Individual chapters provide justification for choice of devices.
|
|
|
Stroke mechanism of bridge crane
Tomeš, Jakub ; Sedláček, Martin (referee) ; Škopán, Miroslav (advisor)
The bachelor thesis deals with the design of bridge crane lifting gear for a load not exceeding 10,000 kg. The work includes the design of the basic parts of the lifting gear, such as rope diameter, rope drum and rollers. There is also included the choice of standardized parts such as electric motor, crane gearbox, flexible clutch or drum brake. The last chapter describe the strength calculation of the rope drum and the bearing life calculation together with the design of welds and tight pen. The output of the bachelor thesis is the drawings of the cable drum weld and the mechanism of the lifting mechanism.
|
|
|
Design of Lifting Mechanism of Crane
Sokol, Filip ; Malášek, Jiří (referee) ; Pokorný, Přemysl (advisor)
This bachelor thesis deals with design and calculation of the basic parts of lifting mechanism of double girder bridge crane. First part of thesis contains concept of solution. The second one is engaged in own design of individual components and their calculation. Third part contains strength calculation of cable drum.
|
guest ::
